Omron CS1W-MCH71 -, Руководство по эксплуатации

Страница: 518 / 717

473
Interface Specifics
Section 7-4
• Turning ON the bit [Deceleration Stop] after having started deceleration
stop operation will not interrupt deceleration stop operation.
Status Condition Nil
Effect of Other Functions Nil
Effect on Other Functions Nil
System parameter Nil
Program Example
Timing Chart
Axis Control Bit: ABS Origin Setting Not influenced Execution prohibited
IOWR: Present Position Preset Not influenced Execution prohibited
Operation At rising edge ON
R1
x+0 to 31.01
x+32 to 63.05
DIFU
R1
Deceleration
Stop Condition
Deceleration Stop
Axis Operating
Work bit
x+0 to 31.01
Deceleration Stop (Axis)
0
1
0
T1
1
0
T1
Jog operation cannot be executed because
thee bit [Deceleration Stop] has been ON. Turning OFF the bit
[Deceleration Stop] after
deceleration has been
already started will not
make the axis to
accelerate again.
Axis Control Bit:
JOG
Axis Control Bit:
Deceleration Stop