background image

EMPLOYEE Copy 

 

FAST Lit. Part No. 229-51317 Rev. B (EMPLOYEE)     11/01/2007

                               (L20-321 rev 0 12/07)                            P

age 1  

©

 2005-2007 Food Automation – Service Techniques, Inc. All Rights Reserved 

This document contains confidential information. The dissemination, publication,  
copying, or duplication of this document without prior written authorization is  
strictly prohibited. 

Process Controller

 – (FASTRON.)

®

 VC-210 

 

(FASTRON.) VC-210 Controller 

The (FASTRON.) VC-210 process controller 
is used to control many different appliances.  

Each controller can time up to 20 products, 
store messages, alarm names, cooking and 
filtering parameters, and has shortening 
management capabilities.   

 

 

FAST is not liable for any use of product not in accordance with FAST’s installation 
and operating instructions.  
 
Before using this equipment or for any questions on the operation of the appliance, 
consult and follow all instructions and safety warnings found in the appliance 
operators’ manual supplied from the manufacturer of the appliance. 

Summary of Contents for VC-210

















Reviews: