ELC-COENETM
Ethernet Communication Module
Instruction Sheet
WARNING
x
This instruction sheet only provides introductory information on electrical specification, general
specifications, installation, basic operation and settings of ELC-COENETM. For more detailed
information on the network protocols, please refer to relevant references or literatures.
x
This is an OPEN TYPE Controller. The ELC should be kept in an enclosure away from airborne
dust, humidity, electric shock risk and v bration. Also, it is equipped with protective methods
such as some special tools or keys to open the enclosure, so as to avoid the hazard to users
and the damage to the ELC. DO NOT touch terminals when power on.
x
Please read this instruction sheet carefully before use and follow this instruction to operate the
device in order to prevent damages on the product or injuries to staff.
x
Use cooper conductors only and the temperature is 60/70°C. Ambient temperature is 55°C.
x
Power, input and output (I/O) wiring must be in accordance with Class
ȱ
, Division 2 wiring
methods – Article 501-10(B)(1) of the National Electrical Code.
x
Suitable for use in Class
ȱ
, Division 2, Groups A, B, C, D or non-hazardous locations only.
x
Explosion hazard – Substitution of components may impair suitability for Class
ȱ
, Division 2.
x
Explosion hazard - DO NOT disconnect equipment unless power has been switched off or the
area is known to be non hazardous.
1
INTRODUCTION
1.1 Model Explanation & Peripherals
Thank you for choosing Eaton Logic Controller (ELC) series products.
Functions:
Supports MODBUS TCP/IP
Supports Master and Slave Data Exchange
ELC-PV28NNDR/T Automatic Time Correction
Supports E-Mail
Supports SNMP V1 and V2
Transmission Speed: 10/100 Mbps
IP Label MAC Address
IP AD DR ES S
SU BN E T M A SK
00D0AF 100022
1.2 Product Profile & Outline
AN
RS-232
INK
RS-232
OWER
00M
3
2
4
6
1
8
7
5
M
Extension Port to connect Device
N
Extension Port to connect Extension module
O
POWER, LINK, RS-232, 100M LED
P
Extension clip
Q
Extension hole for mounting unit or module
R
DIN rail clip
S
RS-232 port
T
E hernet RJ-45 port
Product Profile:
Unit mm [inchs]
AN
RS-232
NK
RS-232
OWER
00M
9
0
[3.543]
60 [
2.362]
33.1 [1.303]
60 [2.362]
3 [0.118]
2011-01-17
5011670306-CEM6
