NXP Semiconductors MPC5566, Reference Manual

Page: 974 / 1268

Deserial Serial Peripheral Interface (DSPI)
MPC5566 Microcontroller Reference Manual, Rev. 2
Freescale Semiconductor 20-49
20.4.4.7.2 Parallel Chaining
Parallel chaining allows the PCS x and SCK x signals from a master DSPI to be shared by internal slave
DSPIs and external slave SPI devices. Signal sharing reduces DSPI pin utilization. An example of a
parallel chain is shown in
Figure 20-27 .
Figure 20-27. Example of Parallel Chaining of DSPI A, B, C and D
In the parallel chaining example, the SOUT x and SIN x of the DSPIs connect to separate external SPI
devices. All internal and external SPI modules share PCS x and SCK x signals. DSPI A controls and initiates
all transfers, but the DSPI slaves each have a trigger output signal MTRIG that indicates to DSPI A that a
trigger condition has occurred in the DSPI slaves.
When the slave DSPI has a change in data to be serialized, it asserts the MTRIG signal that propagates to
DSPI A which initiates the transfer. DSPI B propagates trigger signals from DSPI C to DSPI A.DSPI C
propagates trigger signals from DSPI D to DSPI B.
The MTOCNT field in the DSPI x _DSICR must be written with the number of bits to be transferred. In
parallel chaining the number written to MTOCNT must match the FMSZ field in the selected
DSPI x _CTAR.
SOUT
ht
SCK
SIN
MTRIG
SS
MCU
DSPI A
SOUT
ht
SCK
SIN
PCS[0]
SINA
PCSA[0]
SCKA
SOUT
A
SINB
(master)
DSPI B
(slave)
SOUT
SCK
SIN
MTRIG
SS
DSPI C
(slave)
SOUTB
SINC
SOUTC
SCK SS
SIN
Slave device
SPI
SOUT
SCK SS
SIN
Slave device
SPI
SOUT
SCK SS
SIN
Slave device
SPI
SOUT