manualshive.com logo in svg

NXP Semiconductors MPC5566, Reference Manual

Share
Download
NXP Semiconductors MPC5566 Reference Manual Download Page 652

Fast Ethernet Controller (FEC)

MPC5566 Microcontroller Reference Manual, Rev. 2

Freescale Semiconductor

15-43

 

15.4.14 Ethernet Error-Handling Procedure

The Ethernet controller reports frame reception and transmission error conditions using the FEC RxBDs, 
the EIR register, and the MIB block counters.

15.4.14.1 Transmission Errors

15.4.14.1.1

Transmitter Underrun 

If this error occurs, the FEC sends 32 bits that ensure a CRC error and stops transmitting. All remaining 
buffers for that frame are then flushed and closed. The UN bit is set in the EIR. The FEC then continues 
to the next transmit buffer descriptor and begin transmitting the next frame.

The “UN” interrupt is asserted if enabled in the EIMR register.

15.4.14.1.2

Retransmission Attempts Limit Expired

 

When this error occurs, the FEC terminates transmission. All remaining buffers for that frame are flushed 
and closed, and the RL bit is set in the EIR. The FEC then continues to the next transmit buffer descriptor 
and begin transmitting the next frame.

The “RL” interrupt is asserted if enabled in the EIMR register.

15.4.14.1.3

Late Collision

 

When a collision occurs after the slot time (512 bits starting at the preamble), the FEC terminates 
transmission. All remaining buffers for that frame are flushed and closed, and the LC bit is set in the EIR 
register. The FEC then continues to the next transmit buffer descriptor and begin transmitting the next 
frame.

The “LC” interrupt is asserted if enabled in the EIMR register.

15.4.14.1.4

Heartbeat

 

Some transceivers have a self-test feature called ‘heartbeat’ or ‘signal quality error.’ To signify a good 
self-test, the transceiver indicates a collision to the FEC within 4 microseconds after completion of a frame 
transmitted by the Ethernet controller. This indication of a collision does not imply a real collision error 
on the network, but is rather an indication that the transceiver still seems to be functioning properly. This 
is called the heartbeat condition. 

If the HBC bit is set in the TCR register and the heartbeat condition is not detected by the FEC after a frame 
transmission, then a heartbeat error occurs. When this error occurs, the FEC closes the buffer, sets the HB 
bit in the EIR register, and generates the HBERR interrupt if it is enabled.

Summary of Contents for MPC5566





















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands