
Boot Assist Module (BAM)
MPC5566 Microcontroller Reference Manual, Rev. 2
16-10
Freescale Semiconductor
•
Sets the EXTM bit that enables the EBI for external master operation
•
Configures the EBI for external arbitration by setting the EARB bit.
•
Configures the EBI signals BB, BG, BR for bus arbitration. Refer to
.
Table 16-6. External Bus Interface Configuration
Pins
1
1
Refer to
Chapter 12, “External Bus Interface (EBI)
,” since some signals are not implemented on all devices.
Function After
Device Reset
Function and Value After BAM Execution
Serial Boot Mode
2
or
Internal Boot Mode
2
These values are for serial boot mode only when entered directly using the BOOTCFG signals.
External Boot
with no Arbitration
3
(Single-master Mode)
3
If serial boot is entered indirectly from external boot mode because a valid RCHW was not found, the EBI remains configured
according to these columns.
External Boot
with External Arbitration
(Multi-master Mode)
Function
Function
Function
PCR
Value
Function
PCR
Value
ADDR[8:31]
GPIO
GPIO
ADDR[8:31]
0x0440
ADDR[8:31]
0x0440
DATA[16:31]
GPIO
GPIO
GPIO or
DATA[16:31]
4
4
If the BAM reads a valid RCHW with the PS0 bit clear, DATA[16:31] are reconfigured from GPIO to data bus signals by writing
0x0440 to the pad configuration registers (PCRs).
Default or
GPIO or
DATA[16:31]
Default or
0x1440
DATA[0:15]
GPIO
GPIO
DATA[0:15]
0x0440
DATA[0:15]
0x0440
TEA
GPIO
GPIO
GPIO
Default
5
5
The BAM does not write to the PCR for this signal; the value is the PCR default value. Refer to
Chapter 6, “System Integration
” for the signal PCR default values.
GPIO
Default
CS[0]
GPIO
GPIO
CS[0]
0x0443
CS[0]
0x0443
CS[1:3]
GPIO
GPIO
GPIO
Default
GPIO
Default
WE/BE[0]
GPIO
GPIO
WE[0]
0x0443
WE/BE[0]
0x0443
WE/BE[1:3]
GPIO
GPIO
GPIO
Default
GPIO
Default
OE
GPIO
GPIO
OE
0x0443
OE
0x0443
TS
GPIO
GPIO
TS
0x0443
TS
0x0443
TA
GPIO
GPIO
GPIO
Default
GPIO
Default
RD_WR
GPIO
GPIO
GPIO
Default
GPIO
Default
BDIP
GPIO
GPIO
GPIO
GPIO
Default
BB
GPIO
GPIO
GPIO
Default
BB
0X0443
BG
GPIO
GPIO
GPIO
Default
BG
0X0443
BR
GPIO
GPIO
GPIO
Default
BR
0X0443
TSIZ[0:1]
GPIO
GPIO
GPIO
Default
GPIO
Default
Summary of Contents for MPC5566
