manualshive.com logo in svg

NXP Semiconductors MPC5566, Reference Manual

Share
Download
NXP Semiconductors MPC5566 Reference Manual Download Page 1148

Nexus

MPC5566 Microcontroller Reference Manual, Rev. 2

Freescale Semiconductor

25-55

 

25.14 BTM Operation

25.14.1

Enabling Program Trace

Both types of branch trace messaging can be enabled in one of two ways:

•

Setting the TM field of the DC1 register to enable program trace (DC1[TM])

•

Using the PTS field of the WT register to enable program trace on watchpoint hits (e200z6 
watchpoints are configured within the CPU)

25.14.2

Relative Addressing

The relative address feature is compliant with the IEEE

®

-ISTO 5001-2003 standard recommendations, 

and is designed to reduce the number of bits transmitted for addresses of indirect branch messages.

The address transmitted is relative to the target address of the instruction which triggered the previous 
indirect branch (or sync) message. It is generated by XOR’ing the new address with the previous address, 
and then using only the results up to the most significant 1 in the result. To recreate this address, an XOR 
of the (most-significant 0-padded) message address with the previously decoded address gives the current 
address.

Previous address (A1) =0x0003FC01, New address (A2) = 0x0003F365 

Figure 25-38. Relative Address Generation and Re-creation

25.14.3

Branch and Predicate Instruction History (HIST)

If DC[PTM] is set, BTM messaging uses the branch history format. The branch history (HIST) packet in 
these messages provides a history of direct branch execution used for reconstructing the program flow. 
This packet is implemented as a left-shifting shift register. The register is always pre-loaded with a value 
of one (1). This bit acts as a stop bit so that the development tools can determine which bit is the end of 
the history information. The pre-loaded bit itself is not part of the history, but is transmitted with the 
packet.

Message Generation:

A1 = 0000 0000 0000 0011 1111 1100 0000 0001
A2 = 0000 0000 0000 0011 1111 0011 0110 0101

A1     A2 = 0000 0000 0000 0000 0000 1111 0110 0100

Address Message (M1) = 1111 0110 0100

Address Re-creation:

A1     M1 = A2
A1 = 0000 0000 0000 0011 1111 1100 0000 0001
M1 = 0000 0000 0000 0000 0000 1111 0110 0100

A2 = 0000 0000 0000 0011 1111 0011 0110 0101

Summary of Contents for MPC5566





















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands