NXP Semiconductors MPC5566, Reference Manual

Page: 70 / 1268

Introduction
MPC5566 Microcontroller Reference Manual, Rev. 2
Freescale Semiconductor 1-13
• Execute 1
• Execute 2 and memory access 1
• Execute 3 and memory access 2
• Register writeback
The operation of the pipeline stages overlap so that most instructions execute in a single-clock.
The integer execution unit consists of a 32-bit arithmetic unit (AU), a logic unit (LU), a 32-bit barrel
shifter, a mask-insertion unit (MIU), a condition register manipulation unit (CRU), a count-leading-zeros
unit (CLZ), a 32 x 32 hardware multiplier array, result feed-forward hardware, and support hardware for
division.
Most arithmetic and logical operations are executed in a single cycle with the exception of multiply and
divide instructions, which are implemented with a pipelined hardware array. The CLZ unit operates in a
single clock cycle.
The instruction unit contains an incremental program counter (PC) and a dedicated branch address adder
to minimize delays during change of flow operations. Sequential prefetching is performed to ensure a
supply of instructions into the execution pipeline. Branch target prefetching is performed to accelerate
taken branches. Prefetched instructions are placed into an instruction buffer capable of holding six
sequential instructions and two branch target instructions.
Branch target addresses are calculated in parallel with branch instruction decode, resulting in execution
time of three clocks. Conditional branches which are not taken execute in a single clock. Branches with
successful look-ahead and target prefetching have an effective execution time of one clock.
Memory load and store operations are provided for byte, halfword, word (32-bits), and doubleword
(64-bits) data, with automatic zero or sign extension of byte and halfword load data. These instructions can
be pipelined to allow effective single cycle throughput. Load and store multiple word instructions allow
low overhead context save and restore operations. The load/store unit contains a dedicated effective
address adder to allow effective address generation to be optimized.
The condition register unit supports the condition register (CR) and condition register operations defined
by the Power Architecture technology. The condition register consists of eight 4-bit fields that reflect the
results of certain operations, such as move, integer and floating-point compare, arithmetic, and logical
instructions, and provide a mechanism for testing and branching.
Vectored and auto-vectored interrupts are supported by the CPU. Vectored interrupt supports unique
interrupt handlers invoked with no software overhead for multiple interrupt sources.
The signal processing extension (SPE) APU supports vector instructions (SIMD) operating on 16- and
32-bit fixed-point data types, as well as 32-bit IEEE
®
-754 single-precision floating-point formats, and
supports single-precision floating-point operations in a pipelined fashion. The 64-bit general-purpose
register file is used for source and destination operands, and there is a unified storage model for
single-precision floating-point data types of 32-bits and the normal integer type. Low latency fixed-point
and floating-point add, subtract, multiply, divide, compare, and conversion operations are provided, and
most operations can be pipelined.