manualshive.com logo in svg

NXP Semiconductors MPC5566, Reference Manual

Share
Download
NXP Semiconductors MPC5566 Reference Manual Download Page 682

Enhanced Modular Input/Output Subsystem (eMIOS)

MPC5566 Microcontroller Reference Manual, Rev. 2

Freescale Semiconductor

17-3

 

17.1.1

Overview

The eMIOS builds on the MIOS concept by using a unified channel module that provides a superset of the 
functionality of all the individual MIOS channels, while providing a consistent user interface. This allows 
more flexibility as each unified channel can be programmed for different functions.

17.1.2

Features

•

24 unified channels

•

Unified channels features

— 24-bit registers for captured/match values

— 24-bit internal counter

— Internal prescaler

— Dedicated output pin for buffer direction control

— Selectable time base

— Can generate its own time base

•

Four 24-bit wide counter buses

— Counter bus A can be driven by unified channel 23 or by the STAC bus.

— Counter bus B, C, and D are driven by unified channels 0, 8, and 16, respectively.

— Counter bus A can be shared among all unified channels. UCs 0 to 7 can share counter bus A 

and B, UCs 8 to 15 can share counter bus A and C, and UCs 16 to 23 can share counter buses 
A and D.

•

One global prescaler

•

Shared time bases through the counter buses

•

Synchronization among internal and external time bases

•

Shadow FLAG register

•

State of module can be frozen for debug purposes

•

DMA request capability for some channels

•

Motor control capability

Summary of Contents for MPC5566





















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands