manualshive.com logo in svg

NXP Semiconductors MPC5566, Reference Manual

Share
Download
NXP Semiconductors MPC5566 Reference Manual Download Page 1139

Nexus

MPC5566 Microcontroller Reference Manual, Rev. 2

25-46

Freescale Semiconductor

 

2. The second pass through the DR then shifts the data in or out of the JTAG port, lsb first.

a) During a read access, data is latched from the selected Nexus register when the JTAG state 

machine passes through the capture-DR state.

b) During a write access, data is latched into the selected Nexus register when the JTAG state 

machine passes through the update-DR state.

25.12 Ownership Trace

This section details the ownership trace features of the NZ6C3 module.

Ownership trace provides a macroscopic view, such as task flow reconstruction, when debugging software 
written in a high level (or object-oriented) language. It offers the highest level of abstraction for tracking 
operating system software execution. This is especially useful when the developer is not interested in 
debugging at lower levels. 

25.12.1 Ownership Trace Messaging (OTM)

Ownership trace information is messaged via the auxiliary port using an ownership trace message (OTM). 
The e200z6 processor contains a Power Architecture Book E defined process ID register within the CPU.

The process ID register is updated by the operating system software to provide task/process ID 
information. The contents of this register are replicated on the pins of the processor and connected to 
Nexus. The process ID register value can be accessed using the 

mfspr

/

mtspr

 instructions. Please refer to 

the 

e200z6 PowerPC

TM

 

Core Reference Manual

for more details on the process ID register.

The only condition that causes an ownership trace message occurs when the OTR register is updated or 
process ID register by the e200z6 processor, the data is latched within Nexus, and is messaged out via the 
auxiliary port, allowing development tools to trace ownership flow. 

Ownership trace information is messaged out in the following format:

Figure 25-27. Ownership Trace Message Format

Nexus Register Index:

Selected from values in 

Table 25-24

Read/Write (R/W):

0 Read
1 Write

PROCESS

MSB

LSB

1

2

SRC

TCODE (000010)

3

6 bits

4 bits

32 bits

Fixed length = 42 bits

Summary of Contents for MPC5566





















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands