Foundry NetIron M2404C and M2404F Metro Access Switches
Configuring QoS (Rev. 03)
Overview
© 2008 Foundry Networks, Inc.
Page 31 of 62
----------+-----+---------------------+---------
green | 0 | 4 | yellow
green | 1 | 4 | yellow
green | 2 | 4 | yellow
green | 3 | 4 | yellow
green | 4 | 4 | yellow
green | 5 | 4 | yellow
green | 6 | 4 | yellow
green | 7 | 4 | yellow
yellow | 0 | none | none
yellow | 1 | none | none
yellow | 2 | none | none
yellow | 3 | none | none
yellow | 4 | none | none
yellow | 5 | none | none
yellow | 6 | none | none
yellow | 7 | none | none
Displaying Traffic Shaping
The
show qos tx shaper
command, in Privileged (Enable) mode, displays the transmit rate for the
transmit port or transmit port and queue.
NOTE
Since the rate granularity is limited, whenever the user sets the rate, a message
that specifies the rate that is actually configured, will be seen.
Command Syntax
device-name
#
show qos tx shaper
Example
device-name
#
show qos tx shaper
Interface 1/1/1
==================
qos shaper rate 2048K burst 16K
QoS Tx Scheduling Commands
A QoS scheduling command overrides any previous QoS scheduling command.
Table 13
lists the commands to configure and display the QoS scheduling algorithms.
Table 13: QoS Scheduling Commands
Command
Description
qos scheduling sp
Configures Strict Priority (SP) scheduling.
show qos scheduling
Displays the current QoS scheduling settings.
qos scheduling wrr
Configures Weighted Round-Robin (WRR) scheduling.
qos scheduling hybrid-1
Configures first hybrid-type scheduling.