![background image](http://html1.mh-extra.com/html/foundry-networks/netiron-m2404c/netiron-m2404c_user-manual_23242731031.webp)
Foundry NetIron M2404C and M2404F Metro Access Switches
Network Administration Tools (Rev. 03)
802.1ag Connectivity Fault Management (CFM)
© 2008 Foundry Networks, Inc.
Page 95 of 155
Enabling the Compatibility with Version 6.1
The
use-draft61
command, in CFM Protocol Configuration mode, enables the compatibility with
the old version 6.1 of IEEE 802.1ag protocol. PDU will be used for connectivity, loopback and
linktrace. The
no
form of the command restores the new version.
Command Syntax
device-name
(config-cfm)#
use-draft61
device-name
(config-cfm)#
no use-draft61
Example
device-name
(config-cfm)#
use-draft61
Showing the Compatibility with Version 6.1
The
show
use-draft61
command, in CFM Protocol Configuration mode, shows if the compatibility
with the old version 6.1 of IEEE 802.1ag protocol is enabled or disabled.
Command Syntax
device-name
(config-cfm)#
show use-draft61
Example
device-name
(config-cfm)#
show use-draft61
Compatibility with old version is Enable
Configuring 802.1ag CFM in Maintenance Domain Mode
The following table lists the 802.1ag CFM Maintenance Domain commands.
Table 19: 802.1ag CFM Maintenance Domain Commands
Command
Description
ma name
Creates a maintenance association within a specified domain.
mip-policy
Specifies the conditions in which MIPs are automatically created on
ports.
senderid-content
Configures the content of the Sender ID TLV (Type Length Value)
included in most of the CFM packets sent by the MEPs.
Creating Maintenance Associations
The
ma name
command, in Maintenance Domain mode, creates a maintenance association within
a specified domain. The
ma name
command changes the Maintenance Domain mode to a Specific
Maintenance Association mode. The
no
form of the command removes the created MA.