Foundry NetIron M2404C and M2404F Metro Access Switches Configuring VLANs (Rev.03)
Super VLANs
© 2008 Foundry Networks, Inc.
Page 56 of 73
Figure 13: Super VLAN Configuration
1. Enable Super VLAN on interface 1/1/1 with the uplink 1/1/9:
device-name
#
configure terminal
device-name
(config)#
interface 1/1/1
device-name
(config-if 1/1/1)#
super-vlan 1/1/9
2. Enable Super VLAN on interface 1/1/2 with the uplink 1/1/9:
device-name
(config-if 1/1/1)#
interface 1/1/2
device-name
(config-if 1/1/2)#
super-vlan 1/1/9
3. Enable Super VLAN on interface 1/1/3 with the uplink 1/1/9:
device-name
(config-if 1/1/2)#
interface 1/1/3
device-name
(config-if 1/1/3)#
super-vlan 1/1/9
device-name
(config-if 1/1/3)#
end
4. Display the interface 1/1/1 configuration:
device-name
#
show interface 1/1/1
Name =
Type = 100BaseTX (L3)
EnableState = enable
Link = down
Duplex speed mode = autonegotiate
Duplex speed status = unknown
Flow control mode = disable
Flow control status = disable
Backpressure = disable
Broadcast limit = unlimited
Default VLAN = 1
Super VLAN Port = 1/1/9
5. Display the Super VLAN configuration: