Foundry NetIron M2404C and M2404F Metro Access Switches
Network Administration Tools (Rev. 03)
802.1ag Connectivity Fault Management (CFM)
© 2008 Foundry Networks, Inc.
Page 91 of 155
repeat minutes
<
minutes
>
seconds
<
seconds
>
(Optional). Repetition interval of the monitoring process in the
in the range <0-60>min and/or <0-60>seconds. By default, the
repetition interval is 1 minute.
profile NAME
(Optional). Specifies the name of the profile to be used for
monitoring.
Configuring the CFM Performance Monitoring Profiles
The
profile
command, in CFM Protocol Configuration mode, creates a CFM profile and enters
into the CFM Profile Configuration mode to specify parameters of the current profile. The
no
form
of the command deletes the CFM profile.
Command Syntax
device-name
(config-cfm)#
profile NAME
device-name
(config-cfm-profile-
NAME
)#
device-name
(config-cfm)#
no profile NAME
Argument Description
NAME
Specifies the name of the CFM profile.
Setting the Frame-Loss Error Threshold Value
The
frame-loss-error
command, in CFM Profile Configuration mode, sets the frame-loss error
threshold value.
By default, the frame-loss error is enabled and the threshold value is 10 percent.
Command Syntax
device-name
(config-cfm-profile-
NAME
)#
frame-loss-error
<
frame-loss-error-
percent
>
Argument Description
frame-loss-error-
percent
The round-trip frame-loss error threshold, in percent. The range is <0-
99>.
Setting Frame-Loss Warning Threshold Value
The
frame-loss-warning
command, in CFM Profile Configuration mode, sets the round-trip
frame-loss warning threshold value.
By default, the frame-loss warning is enabled and the threshold value is 8 percent.
Command Syntax
device-name
(config-cfm-profile-
NAME
)#
frame-loss-warning
<
frame-loss-
warning-percent
>