Foundry NetIron M2404C and M2404F Metro Access Switches
Network Administration Tools (Rev. 03)
Service Assurance Application (SAA)
© 2008 Foundry Networks, Inc.
Page 138 of 155
Example
device-name
#
configure terminal
device-name
(config)#
saa test T1
device-name
(config-saa-test)#
Disabling the Current SAA Test
The
shutdown
command, in SAA Test Configuration mode, disables the SAA test.
The
no
form of the command enables the SAA test.
By default, all tests are in the disabled state.
Command Syntax
device-name
(config-saa-test)#
shutdown
device-name
(config-saa-test)#
no shutdown
Example
device-name
(config-saa-test)#
shutdown
Configuring Repeat Frequency
The
frequency
command, in SAA Test Configuration mode, specifies the repeat frequency.
The
no
form of the command removes the repeat frequency.
By default, no repeat frequency is specified.
Command Syntax
device-name
(config-saa-test)#
frequency <0-65535>
device-name
(config-saa-test)#
no frequency
Argument Description
0-65535
Specifies the frequency of test repetitions in seconds.
Example
device-name
(config-saa-test)#
frequency 20
Example for Configuring Probe Count, Frequency and a Probe that Timeouts: :
device-name
(config-saa-test)#
probe-count 10
device-name
(config-saa-test)#
frequency 20
device-name
(config-saa-test)#
timeout 8
Probes are send at the following interval. (in seconds):
1, 2, 3, 4, 5, 6(timeout), 7(timeout), 8(timeout), 9(timeout),
10(timeout) <<-- 20sec+8sec -->> 1,2,3,4,5,6,7,8,9,10