![background image](http://html1.mh-extra.com/html/foundry-networks/netiron-m2404c/netiron-m2404c_user-manual_2324273964.webp)
Foundry NetIron M2404C and M2404F Metro Access Switches
Network Administration Tools (Rev. 03)
MEF OAM
© 2008 Foundry Networks, Inc.
Page 28 of 155
OAM Specific Process Configuration Commands
Table 4
lists the MEF OAM specific process configuration commands.
NOTE
These commands are not supported for VPLS domain.
Table 4: MEF OAM Specific Process Configuration Commands
Command
Description
oam create-process
Creates a specific two-way monitoring process.
oam process
Enters into predefined OAM Process Configuration mode.
oam vlan
Sets the VLAN ID to use for the specified two-way
monitoring process.
oam priority
Sets the 802.1p priority in the OAM packets.
oam jitter-error
Enables round-trip jitter error monitoring and optionally sets
the jitter error threshold and the time period during which
jitter errors should be monitored.
oam jitter-warning
Enables round-trip jitter warning monitoring and optionally
sets the jitter warning threshold and the time period during
which jitter warnings should be monitored.
oam frame-loss-error
Enables the frame-loss error monitoring and optionally sets
the round-trip frame-loss error threshold value.
oam frame-loss-warning
Enables the frame-loss warning monitoring and optionally sets
the round-trip frame-loss warning threshold value.
oam latency-error
Enables the average round-trip latency monitoring and
optionally sets the round-trip latency error threshold value and
the time period.
oam latency-warning
Enables the average round-trip latency monitoring and
optionally sets the round-trip latency warning threshold value
and the time period.
oam frame-size
Sets the size of connectivity test request packets.
oam results-bucket-size
Sets the number of results to collect for frame-loss calculation.
oam timeout
Sets the OAM timeout in the MAC connectivity test.
Creating an OAM Two-way Monitoring Process
The
oam create-process
command, in MEF OAM Configuration mode, creates specific two-way
monitoring process.
After creating the monitoring process, the device enters in OAM Process Configuration mode.
By default, the process will be defined as target MAC address of this probe and the repetition
interval is 1 minute.