Foundry NetIron M2404C and M2404F Metro Access Switches
Configuring Switch Authentication Features (Rev. 03)
802.1x Port-Based Authentication
© 2008 Foundry Networks, Inc.
Page 60 of 70
ReAuthentication = DISABLED
ReAuthentication timer = 3600 sec
Unicast-clients compatibility = OFF
Radius timeout = 30 sec
Host timeout = 30 sec
Tx-period timeout = 30 sec
Quiet period = 60 sec
Maximum requests = 2 sec
Radius Accounting timeout = 3 sec
Maximum Accounting requests = 3
Radius Accounting = disabled
Interim-Update interval = not configured
Displaying the Configured RADIUS Servers
The
show dot1x radius
command, in Privileged (Enable) mode, displays all RADIUS servers that
are configured.
Command Syntax
device-name
#
show dot1x radius
[
statistic
]
Argument Description
statistic
(Optional). Displays statistic information for the configured RADIUS servers.
Example 1
device-name
#
show dot1x radius
Configured RADIUS Servers 1
Retransmit count 2
Timeout 50 sec
DeadTime 0 sec
=====================================================================
ID IP Address Port Status Key Status Time
---------------------------------------------------------------------
1 192.168.0.40 1812 ALIVE configured 00:55:42
Example 2
device-name
#
show dot1x radius statistic
RADIUS server [192.168.0.40:1812]:
Sent Packets:
RADIUS Request: 270
Received Packets:
RADIUS Accept: 135
RADIUS Reject: 0
RADIUS Challenge: 135
RADIUS Unknown: 0
Displaying the 802.1x for a Specific Port
The
show dot1x interface
command, in Privileged (Enable) mode or the
dot1x
command in
Interface Configuration mode, displays the 802.1x information for a specific port.