Foundry NetIron M2404C and M2404F Metro Access Switches
Configuring HQoS (Rev.03)
Configuration
© 2008 Foundry Networks, Inc.
Page 44 of 98
Table 11: Default Configuration of Control Traffic, Mapped to a Single High-Priority Queue
Queues
Parent
Shaping Egress Service
WFQ Profile #
WRED
Profile #
Remarking
1
L2 scheduler DefEg8
disabled
0
33
disabled
Network Ingress Policy Default Configuration
By default, the network ingress policy is applied on both network ports.
Table 12
shows the Network Ingress Policy default Configuration.
Table 12: Network Ingress Policy Default Configuration
EXP
Forwarding Class (FC)
In Color
0 Best-Effort
(be) Yellow
1 Low-2
(l2)
Green
2 Assured
(af)
Yellow
3
Low -1 (l1)
Green
4 High-2
(h2)
Green
5 Expedited
(ef) Green
6 High-1
(h1)
Green
7 Network-Control
(nc)
Green
Network Egress Policy Default Configuration
The following default configuration will be applied on both network ports:
All network queues will be enabled at boot (24 queues per network ports).
WRED is enabled with default profile on all network queues.
Shaping is by default disabled on all queues.
MPLS EXP remarking is always enabled on all network interfaces.
Traffic will be mapped to network queues as follows:
Table 13
shows the Network Egress Policy Default Configuration.
Table 13: Network Egress Policy Default Configuration
Forwarding Class (FC)
Unicast Queue
Multicast Queue Default Priority
Best-Effort (be)
Queue 1
Queue 9
Low
Low-2 (l2)
Queue 2
Queue 10
Low
Assured (af)
Queue 3
Queue 11
Low
Low -1 (l1)
Queue 4
Queue 12
Low