Foundry NetIron M2404C and M2404F Metro Access Switches
Configuring HQoS (Rev.03)
Configuration
© 2008 Foundry Networks, Inc.
Page 72 of 98
Command Syntax
device-name
(config hqos-net-que-que
queue-id
)#
network-wfq-profile <net-
wfq-profile-id>
device-name
(config hqos-net-que-que
queue-id
)#
no
network-wfq-profile
Argument Description
net-wfq-profile-id
Specifies the Network Queue WFQ Profile ID.
Configuring Network Shaping Profiles
The
shaper-profile
command, in HQoS Configuration mode, creates a shaper profile. The shaper
can be applied to the following entities:
•
network queue
•
network interface level.
To remove a shaper profile, use the
no
form of this command.
Command Syntax
device-name
(config hqos)#
shaper-profile <shaping-profile-id
>
<cir> <pir>
<cbs> <mbs>
device-name
(config hqos)#
no
shaper-profile <shaping-profile-id
>
Argument Description
shaping-profile-id
The shaping profile ID which identifies the shaping profile.
For network ports the shaping profile ID is in the range <1-2>
For network queues the shaping profile ID is in the range <17-64>.
cir
Specifies the Committed Information Rate value in the following
ranges:
For network ports - <160-1048575> kbps.
For network queues - <160-1048575> kbps.
pir
Specifies the Peak Information Rate value in the following ranges:
For network ports - <160-1048575> kbps.
For network queues - <160-1048575> kbps.
cbs
Specifies the Committed Burst Size value in the range <1-32767> kB.
mbs
Specifies the Maximum Burst Size value in the range <1-32767> kB.