Foundry NetIron M2404C and M2404F Metro Access Switches
Configuring Interfaces (Rev. 03)
Link Aggregation Groups (LAG)
© 2008 Foundry Networks, Inc.
Page 36 of 57
Table 13: Commands to Display the Static LAG and LACP Configuration
Command
Description
show interface link-
aggregation
Displays the Link Aggregation Groups configuration.
show link-aggregation
lacp
Displays a list of all LACP-enabled interfaces in the system with
the configured LACP parameters.
Displaying the Link Aggregation Groups
The
show interface
link-aggregation
command, in Privileged (Enable) mode, displays the link
aggregation groups in the system, as specified by the command arguments. If no argument is
specified, the list includes all static and dynamic link aggregation groups.
NOTE
The
show link aggregation
command replaces the
show trunk
command.
The
show trunk
command is also supported.
Command Syntax
device-name
#
show interface
link-aggregation
[
static
|
dynamic
|
id
<
id-
number
>]
Argument Description
static
(Optional). Displays only the statically defined link aggregation groups.
dynamic
(Optional). Displays only the dynamic link aggregation groups, created by
LACP.
id
<
id-number
>
(Optional). Displays the link aggregation group that is specified by the ID
number
Example
device-name
#
show interface link-aggregation
==========+========+=================+=====================
Agg# |Type | Management Name | Ports |
----------+--------+-----------------+--------------------+
AG01 | static | TRUNK1 | 1/1/1-1/1/3,1/1/5 |
AG03 | LACP | LACP3 | 1/1/25,1/1/26 |
==========+========+=================+=====================
Displaying the LACP Interfaces
The
show link-aggregation lacp
command, in Privileged (Enable) mode, displays a list of all
LACP enabled interfaces with the configured LACP parameters.
Command Syntax
device-name
#
show link-aggregation lacp