Foundry NetIron M2404C and M2404F Metro Access Switches
Configuring MPLS and H-VPLS (Rev. 03)
Resource Reservation Protocol Traffic Engineering (RSVP-TE)© 2008 Foundry Networks, Inc
Page 101 of 113
DeviceA
(config)#
mpls lsr-id 2.2.2.2
8.
Set a packet format compliant with draft 3 of the LSP Ping specification:
DeviceA
(config)#
mpls lsp-ping-use-draft3
9.
Enable the LDP protocol:
DeviceA
(config)#
router ldp
10.
Define a transport address and additional targeted LDP-peer:
DeviceA
(config-router)#
transport-address 2.2.2.2
DeviceA
(config-router)#
targeted-peer 1.1.1.1
DeviceA
(config-router-peer 1.1.1.1)#
exit
DeviceA
(config-router)#
exit
DeviceA
(config)#
RSVP Configuration
11.
Enable the RSVP protocol:
DeviceA
(config)#
router rsvp
12.
Disable the Local Repair Delay and enable support for facility backup
protection for LSPs:
DeviceA
(config-router)#
local-repair-delay disabled
DeviceA
(config-router)#
rsvp-extensions bypassfastreroute
DeviceA
(config-router)#
exit
DeviceA
(config)#
Tunnel Configuration
13.
Set a primary LSP called
toHE
:
DeviceA
(config)#
mpls lsp toHE
14.
Set tunnel attributes:
DeviceA
(config-lsp-toHE)#
fast-reroute
DeviceA
(config-lsp-toHE)#
permit-merging
DeviceA
(config-lsp-toHE)#
record-route
DeviceA
(config-lsp-toHE)#
record-labels
15.
Set FRR mode:
DeviceA
(config-lsp-toHE)#
fast-reroute-mode facility
16.
Configure path hops:
DeviceA
(config-lsp-toHE)#
path toHE
DeviceA
(config-tunnel-path)#
hop 20.1.1.1 strict
DeviceA
(config-tunnel-path)#
exit
17.
Configure ingress and egress LSP IDs for the
toHE:
DeviceA
(config-lsp-toHE)#
ingress-lsr-id 2.2.2.2
DeviceA
(config-lsp-toHE)#
egress-lsr-id 1.1.1.1
DeviceA
(config-lsp-toHE)#
exit