Foundry NetIron M2404C and M2404F Metro Access Switches
Configuring SAA via SNMP (Rev. 01)
Configuration Examples
© 2008 Foundry Networks, Inc
Page 35 of 40
Probe priority: 3
Profile Id: 1
Profile Name: Profile
Probes per repetition: 5
Frequency of repetition: 50
Probe timeout: 5 seconds
Trap generation: pingTestCompleted
data-size: 74
Probe history count: 10
Last response time: 5
Probes sent: 120
Probes received: 70
Jitter: 20
Frame Loss: 5%
Latency: 200
Minimum RTT: 20, Maximum RTT: 25, Average RTT: 20, Sum of squares: 5650
2. Display the SAA threshold profile:
Device1
#
show saa profile 1
Profile name: Profile, index: 1
Frame Loss: 5
Jitter: 20
Latency: 200
Configuration via SNMP
Create an SAA Threshold Profile and Configure an SAA Test on Device1:
1. Create an SAA threshold profile and set the jitter-error threshold value, latency-error threshold
value and frame-loss-error threshold value:
***** SNMP SET-RESPONSE START *****
1.create new row in
saaThresholdCtlTable
by setting rowStatus of
the entry with index 1 to createAndWait(5)
***** SNMP SET-RESPONSE END *******
***** SNMP SET-RESPONSE START *****
2. set
saaThresholdCtlTable.saaThresholdProfileJitter.1
to 20
***** SNMP SET-RESPONSE END *******
***** SNMP SET-RESPONSE START *****
3. set
saaThresholdCtlTable.saaThresholdProfileLatency.1
to 200
***** SNMP SET-RESPONSE END *******
***** SNMP SET-RESPONSE START *****
4. set
saaThresholdCtlTable.saaThresholdProfileFrameloss.1
to 5.0
***** SNMP SET-RESPONSE END *******
***** SNMP SET-RESPONSE START *****
5. set
saaThresholdCtlTable.rowStatus.1
to active(1)
***** SNMP SET-RESPONSE END *******
2. Create a new SAA test:
***** SNMP SET-RESPONSE START *****
1: set
pingCtlRowStatus.default.T1
with value createAndWait(5)
***** SNMP SET-RESPONSE END *******