Foundry NetIron M2404C and M2404F Metro Access Switches
Configuring MPLS and H-VPLS (Rev. 03)
Multiprotocol Label Switching
© 2008 Foundry Networks, Inc
Page 33 of 113
Command Syntax
device-name
(config-lsp-
NAME
)
#
description WORD
device-name
(config-lsp-
NAME
)
#
no description
Argument Description
WORD
The description of the current LSP.
Setting Fast Re-Route Mode
The
fast-reroute-mode
command, in LSP Configuration mode, sets the desired fast reroute (FRR)
mode for a specific LSP. The
no
form of the command disables the fast reroute mode.
By default fast-reroute mode is disabled.
NOTE
Fast-reroute can be enabled on tunnels for which Guarded Destination has not
been set.
Command Syntax
device-name
(config-lsp-
NAME
)
#
fast-reroute-mode facility
device-name
(config-lsp-
NAME
)
#
no
fast-reroute-mode
Argument Description
facility
Specifies fast reroute protection mode using the facility backup method.
Setting Setup Priority for Backup LSPs
The
backup-setup-priority
command, in LSP Configuration mode, specifies setup priority for
backup LSPs, which LSPs will protect the current LSP. The
no
form of this command sets the
backup priority to 0.
By default the priority is 0.
Command Syntax
device-name
(config-lsp-
NAME
)
#
backup-setup-priority <0-7>
device-name
(config-lsp-
NAME
)
#
no backup-setup-priority
Argument Description
0-7
Specifies the setup priority. The default value is 0.
Setting Holding Priority for backup LSPs
The
backup-holding-priority
command, in LSP Configuration mode, sets holding priority for
backup LSPs that will protect the current LSP. The
no
form of this command sets the backup
holding priority to 0.
By default priority is 0.