Foundry NetIron M2404C and M2404F Metro Access Switches
Configuring Interfaces (Rev. 03)
Network Wide Resilience
© 2008 Foundry Networks, Inc.
Page 52 of 57
Command Syntax
device-name
(config-resil-link
N
)#
show
[
N1
|
N1 N2
]
device-name
#
show resilient-links
[
N1
|
N1 N2
]
Argument Description
N1
(Optional). ID number of resilient link to be displayed.
N1 N2
(Optional). Range of ID numbers of resilient link to be displayed.
Example 1
Displaying information on all currently configured resilient links:
device-name
(config-resil-link 1)#
show
=====================================================
| RLink | Port1 | Port2 | Prefer | Backup | Active |
+-------+-------+-------+--------+---------+--------+
| 1 | 1/1/1 | 1/1/2 | Port 1 |shut down| Port 2 |
| 2 | 1/1/5 | 1/1/6 | | standby | Port 1 |
=====================================================
Example 2
Displaying information on resilient link #3:
device-name
(config-resil-link 1)#
show 3
=====================================================
| RLink | Port1 | Port2 | Prefer | Backup | Active |
+-------+-------+-------+--------+---------+--------+
| 3 | 1/1/3 | 1/1/4 | | standby | |
=====================================================
Example 3
Displaying information on the configured resilient links in the range #1 to #4:
device-name
#
show resilient-links 1 4
=====================================================
| RLink | Port1 | Port2 | Prefer | Backup | Active |
+-------+-------+-------+--------+---------+--------+
| 1 | 1/1/1 | 1/1/2 | | standby | |
| 3 | 1/1/3 | 1/1/4 | | standby | |
=====================================================
Displaying the Resilient Link Counters
The
show counter
command, in Resilient-link Configuration mode, and the
show resilient-links
counter
command, in Privileged (Enable) mode, displays how many swaps each resilient link has
undergone in the current session.
The user can specify by ID number or by a range of ID numbers, which configured resilient links to
display. If no ID number is specified, all configured resilient links are displayed.
Command Syntax
device-name
(config-resil-link
N
)#
show counter
[
N1
|
N1 N2
]