Foundry NetIron M2404C and M2404F Metro Access Switches
Switch Administration (Rev. 03)
Boot Loader © 2008 Foundry Networks, Inc.
Page 50 of 87
Command
Description
refresh
Rewrites the FLASH memory.
restore
Restores the FLASH memory.
Accessing the Loader Configuration Mode
The
config
command, in Loader mode, switches the CLI from Loader mode to Loader
Configuration mode.
The CLI prompt will change after executing this command.
Command Syntax
Loader
>
config
Loader
(config)#
Displaying and Changing the OutBand Port IP-address
The
ip-address
command, in Loader Configuration mode, displays or changes the OutBand port IP
address and subnet mask. If no argument is specified, the current IP address and subnet mask will
be displayed.
Command Syntax
Loader
(config)#
ip-address
[
A.B.C.D
/
M
| {
A1.B1.C1.D1 A2.B2.C2.D2
}]
Argument Description
A.B.C.D/M
(Optional). IP address with mask specified by number of bits.
A1.B1.C1.D1 A2.B2.C2.D2
IP address with mask specified in dotted decimal notation.
Example
The following example displays the Loader current IP address:
Loader
(config)#
ip-address
Loader IP address = 10.2.111.111, subnet mask = ffff0000
Displaying and Changing the Switch MAC-address
The
mac-address
command, in Loader Configuration mode, displays or changes the MAC address
of the device. If no argument is specified, the current MAC address is displayed.
Command Syntax
Loader
(config)#
mac-address
[
HH:HH:HH:HH:HH:HH
]
Argument Description
HH:HH:HH:HH:HH:HH
(Optional). The switch MAC address.