Foundry NetIron M2404C and M2404F Metro Access Switches
Configuring HQoS (Rev.03)
Configuration
© 2008 Foundry Networks, Inc.
Page 96 of 98
SW3
(config hqos)#
network-egress-queue-policy Queue
2. Create network queues and apply WFQ profiles to them
SW3
(config hqos-net-queue Queue)#
queue 11
SW3
(config hqos-net-que-que 11)#
network-wfq-profile 11
SW3
(config hqos-net-que-que 11)#
exit
SW3
(config hqos-net-queue Queue)#
queue 12
SW3
(config hqos-net-que-que 12)#
network-wfq-profile 12
SW3
(config hqos-net-que-que 12)#
exit
SW3
(config hqos-net-queue Queue)#
queue 13
SW3
(config hqos-net-que-que 13)#
network-wfq-profile 13
3. Map FCs to network queues:
SW3
(config hqos-net-queue Queue)#
fc h1
SW3
(config hqos-net-queue-fc h1)#
queue 11
SW3
(config hqos-net-queue-fc h1)#
exit
SW3
(config hqos-net-queue Queue)#
fc l1
SW3
(config hqos-net-queue-fc l1)#
queue 12
SW3
(config hqos-net-queue-fc l1)#
exit
SW3
(config hqos-net-queue Queue)#
fc be
SW3
(config hqos-net-queue-fc be)#
queue 13
SW3
(config hqos-net-queue-fc be)#
exit
4. Apply the network-policy to uplink ports:
SW3
(config-if 1/6/1)#
no hqos-network-policy
%Default settings for control traffic will be enabled until valid
Network Policy is set!
SW3
(config-if 1/6/1)#
no hqos-network-egress-queue-policy
SW3
(config-if 1/6/1)#
hqos-network-egress-queue-policy Queue
SW3
(config-if 1/6/1)#
hqos-network-policy NetPol
SW3
(config-if 1/6/1)#
hqos-shaper 1
SW3
(config-if 1/6/1)#
int 1/6/2
SW3
(config-if 1/6/2)#
no hqos-network-policy
%Default settings for control traffic will be enabled until valid
Network Policy is set!
SW3
(config-if 1/6/2)#
hqos-network-policy NetPol