Foundry NetIron M2404C and M2404F Metro Access Switches
Configuring System Message Logging (Rev. 03)
System Message Logging
© 2008 Foundry Networks, Inc.
Page 20 of 22
3. Make the device configuration, for example:
device-name
#
configure terminal
device-name
(config)#
interface 1/1/1
device-name
(config-if 1/1/1)#
link-aggregation static id 2
device-name
(config-if 1/1/1)#
interface 1/1/2
device-name
(config-if 1/1/2)#
link-aggregation static id 2
device-name
(config-if 1/1/2)#
show
Name =
Type = 100BaseTX (L3)
EnableState = enable
Link = up
Duplex mode = autonegotiate
Speed = autonegotiate
Duplex speed status = full-100
Flow control mode = disable
Flow control status = disable
Backpressure = disable
Broadcast limit = unlimited
Multicast limit = unlimited
Unknown limit = unlimited
Default VLAN = 1
Port Crossover = AUTO MDI/MDIX
Super VLAN Port = No
Learning new address = Enabled
Max Packet Size (MRU)= 1528
4. Display the configuration recording:
device-name
#
show configuration-history
! MON JAN 09 00:10:02 2006 :: vty :: console
! Configuration session 4 start
configure terminal
interface 1/1/1
link-aggregation static
interface 1/1/2
link-aggregation static
show interface 1/1/2
! Configuration session 4 end
5. Clear the configuration recording:
device-name
#
clear configuration-history nvram
6. Display the configuration recording after clearing:
device-name
#
show configuration-history
% No commands stored in configuration history.