Foundry NetIron M2404C and M2404F Metro Access Switches
Troubleshooting and Monitoring (Rev. 03)
Periodic Monitoring
© 2008 Foundry Networks, Inc.
Page 41 of 55
Command Syntax
device-name
#
show power-supply
Example
device-name
#
show power-supply
Power supply 2 : OK
Power supply fan 2 : OK
|PS1-------PS2|
| |
|____Front____|
Displaying the Fan Status
The
show fan
command, in Privileged (Enable) mode, displays the fan status. The fan status can
have one of two values:
OK
or
Failed
.
If any fan changes its status, the device can send an SNMP trap to the trap destination.
The trap is recorded in the trap log as follows:
5/22/101 15:07:21 10.4.1.23 trap: p3 5, ent=t5router, comm=public,
reportshardwarepsstatus=02 02 02 01 10.4.1.23
Command Syntax
device-name
#
show fan
Example
device-name
#
show fan
Fan tray:
Fan 1 : OK
Fan 2 : OK
Fan 3 : OK
Configuration Examples
CPU Usage Monitoring
In the following example, CPU usage monitoring is enabled and configured with both
limit
and
delta
commands.
1.
Enable CPU usage monitoring:
device-name
(config)#
monitor cpu-usage enable
2.
Enter into the CPU usage monitoring configuration mode:
device-name
(config)#
monitor cpu-usage
3.
Display CPU usage monitoring settings: