Foundry NetIron M2404C and M2404F Metro Access Switches
Configuring System Message Logging (Rev. 03)
System Message Logging
© 2008 Foundry Networks, Inc.
Page 18 of 22
Argument Description
session-number
(Optional). Number of session displayed in the range <1-65535>.
all
Displays all configuration commands stored in the NVRAM during all
recorded sessions.
size
Displays the number of sessions currently stored in the NVRAM.
status
Displays the current recording state of configuration history (as set by
the
record configuration-history
command in Global Configuration
mode).
Example 1
The following example displays the last configuration-session (two sessions were recorded):
device-name
#
show configuration-history
! MON JAN 09 07:18:03 2006 :: vty :: console
! Configuration session 2 start
configure terminal
interface sw0
ip address 131.119.251.201/24
ip ospf authentication-key abcdefgh
exit
interface sw1
ip address 36.56.0.201/16
ip ospf authentication-key ijklmnop
exit
! Configuration session 2 end
Example 2
The following example displays the specified configuration-session (session number 1):
device-name
#
show configuration-history 1
! MON JAN 09 18:40:17 2006 :: vty :: console
! configuration session 1 start
configure terminal
router ospf
network 36.0.0.0/24 area 36.0.0.0
area 36.0.0.0 stub
area 36.0.0.0 default-cost 20
! Configuration session 1 end
Example 3
The following example displays all recorded configuration-sessions:
device-name#show configuration-history all
! MON JAN 09 18:40:17 2006 :: vty :: console
! Configuration session 1 start
configure terminal
router ospf
network 36.0.0.0/24 area 36.0.0.0
area 36.0.0.0 stub
area 36.0.0.0 default-cost 20
! configuration session 1 end
! MON MAR 11 07:18:03 2002 :: vty :: console
! Configuration session 2 start
configure terminal