![background image](http://html1.mh-extra.com/html/foundry-networks/netiron-m2404c/netiron-m2404c_user-manual_23242731313.webp)
Foundry NetIron M2404C and M2404F Metro Access Switches
Configuring MPLS and H-VPLS (Rev. 03)
Resource Reservation Protocol Traffic Engineering (RSVP-TE)© 2008 Foundry Networks, Inc
Page 84 of 113
Argument Description
1-214783647
Specifies the number of attempts.
Setting Number of Refresh Timeouts before Deleting Blockade
The
rsvp-blockade-multiple
command, in Router Configuration mode, specifies the number of
refresh timeout periods after which the blockade state will be deleted. The
no
form of this
command restores the default value.
The default value is 2.
Command Syntax
device-name
(config-router)#
rsvp-blockade-multiple <1-214783647>
device-name
(config-router)#
no
rsvp-blockade-multiple
Argument Description
1-214783647
Specifies the number of refresh timeout periods.
Setting the Default LSP Setup Priority (Non-Signaled Parameter)
The
lsp-setup-priority
command, in Router Configuration mode, sets the setup priority of the
LSPs. The
no
form of this command sets the default value. By default, the LSP setup priority is 4.
Command Syntax
device-name
(config-router)#
lsp-setup-priority <0-7>
device-name
(config-router)
#
no lsp-setup-priority
Argument Description
0-7
Specifies the LSP setup priority value.
Setting the Default LSP Holding Priority (Non-Signaled
Parameter)
The
lsp-holding-priority
command, in Router Configuration mode, sets the holding priority of
LSPs. The
no
form of this command restores the default value of 3.
Command Syntax
device-name
(config-router)#
lsp-holding-priority <0-7>
device-name
(config-router)
#
no lsp-holding-priority
Argument Description
0-7
Specifies the LSP holding priority value.