Foundry NetIron M2404C and M2404F Metro Access Switches
Configuring HQoS (Rev.03)
Configuration
© 2008 Foundry Networks, Inc.
Page 58 of 98
Applying Network Policy
The
hqos-network-policy
command, in Interface Configuration mode, applies network policy to
the enhanced uplink interface. The default network policy must be removed from the enhanced
uplink port before Network policy to be applied.
The
no
form of this command removes the network policy.
Command Syntax
device-name
(config if-
UU/SS/PP
)#
hqos-network-policy NETWORK
-
POLICY
-
NAME
device-name
(config if-
UU/SS/PP
)#
no hqos-network-policy
Argument Description
NETWORK-POLICY-NAME
Specifies the network policy name as a text string.
Network Queue Policy Commands
Table 17
lists the network queue policy configuration commands.
Table 17: Network Queue Policy Configuration Commands
Command
Description
network-egress-queue-policy
Defines network queue policy.
description
Associate a description with a network queue
policy.
fc
Defines a Forwarding Class and associates an
existing network queue with the new Forwarding
Class.
queue
Sets the mapping between the Forwarding Class and
the queue.
wred-profile
Associates a WRED profile with the queue.
network-wfq-profile
Defines weight profile for this network queue
relative to other network queue of the same
interface.
level
Defines strict priority for this network queue
relative to other network queue of the same
interface.
shaper
Assigns shaping profile to the network queue.
hqos network-egress-queue-policy
Applies network queue policy to the enhanced
uplink interface.
Configuring Network Queue Policy
The
network-egress-queue-policy
command, in HQoS Configuration mode, defines Network
Queue Policy.
The
no
form of this command removes the network queue policy.