Foundry NetIron M2404C and M2404F Metro Access Switches
Configuring DHCP Features (Rev. 03)
DHCP Server
© 2008 Foundry Networks, Inc.
Page 36 of 63
By default, the debug is disabled.
Command Syntax
device-name
#
debug dhcp
{
events
|
packet
}
device-name
#
no debug dhcp
{
events
|
packet
}
Argument Description
events
Sets debug for the DHCP server events.
packet
Sets debug for the DHCP server packets.
Displaying the Status of the DHCP Server Debug Actions
The
show debug
dhcp
command, in Privileged (Enable) mode, displays the status of the debug
actions that are currently activated in the DHCP server. The debug commands can help the network
manager to monitor a session as it proceeds on the device.
Command Syntax
device-name
#
show debug
dhcp
Example
device-name
#
show debug dhcp
DHCP debugging status:
DHCP event debugging is on
Configuration Examples
DHCP Server Configuration
The following example (
Figure 6
) shows a DHCP server that provides two address ranges, each
containing 100 IP addresses. Each range is supplied to a separate subnet. Fixed IP addresses are
configured to three hosts.