Foundry NetIron M2404C and M2404F Metro Access Switches
Configuring ACLs (Rev. 03)
Overview
© 2008 Foundry Networks, Inc
Page 39 of 50
priority
(Optional). Remarks the priority and drop precedence level according to the
policy set by the
qos policy priority
command
in Global Configuration
mode.
This argument is effective only if the user sets the priority remarking policy
(with the qos policy priority command in Global Configuration mode)
Use of this argument consumes a relatively high amount of ACL hardware
resources (up to 8 entries of the maximum 128 allowed for the ACL
conditions).
priority-dp
(Optional). Remarks the drop precedence level according to the policy set by
the
qos policy priority
command
in Global Configuration mode.
Note:
1.
This argument is effective only if the user sets the priority remarking
policy (with the qos policy priority command in Global Configuration
mode)
2.
Use of this argument consumes a relatively high amount of ACL
hardware resources (up to 8 entries of the maximum 128 allowed for the
ACL conditions).
Redirecting Traffic to Specified Interface
The
redirect
command, in Interface or VLAN ACG Configuration mode, redirects the traffic that
matches the conditions of the configured ACG to the specified interface. The
no
form of this
command cancels the traffic redirection for the configured ACG.
The redirection on the ACG will take effect only upon exit from the Interface or VLAN ACG
Configuration mode.
Command Syntax
device-name
(config-if
UU/SS/PP
acg
acl-num
)#
redirect UU/SS/PP
{
tag
|
untag
}
device-name
(config-if
UU/SS/PP
acg
acl-num
)#
no redirect
device-name
(config vlan
VLAN-NAME
acg
acl-num
)#
redirect UU/SS/PP
{
tag
|
untag
}
device-name
(config vlan
VLAN-NAME
acg
acl-num
)#
no redirect
Argument Description
UU/SS/PP
Redirect the flow to the specified interface.
tag
Redirected traffic is tagged.
untag
Redirected traffic is untagged.
Redirecting Traffic to VLAN with ACG
The
set vlan
command, in Interface ACG or VLAN ACG Configuration mode, changes the VLAN
ID in the packet header to the specified value. The
no
form of this command cancels this action for
the configured ACG.
The command takes effect only upon exit from the Interface or VLAN ACG Configuration mode.