![background image](http://html1.mh-extra.com/html/foundry-networks/netiron-m2404c/netiron-m2404c_user-manual_23242731278.webp)
Foundry NetIron M2404C and M2404F Metro Access Switches
Configuring MPLS and H-VPLS (Rev. 03)
Multiprotocol Label Switching
© 2008 Foundry Networks, Inc
Page 49 of 113
Assigning Egress Scheduler Policy to Customer-Site
The
egress-scheduler-policy
command, in Customer Site Configuration mode, assigns Egress
Scheduler Policy to the Customer Site. The Scheduler Policy must be created and correctly
configured prior to assigning it to a Customer Site.
The
no
form of this command removes the policy from Customer Site.
Command Syntax
device-name
(config-customer-site
NAME
)#
egress-scheduler-policy
NAME
device-name
(config-customer-site
NAME
)#
no egress-scheduler-policy
NAME
Argument Description
NAME
Specifies the name of the Scheduler Policy that is to be applied.
Displaying MPLS Information
Table 14
lists the MPLS display command.
Table 14: MPLS Display Command
Command
Description
show mpls interface
Displays the MPLS-enabled interfaces on the device.
show mpls route-marking-
policy
Displays all route marking policies.
Displaying the MPLS Interfaces and Router Information
The
show mpls interface
command, in Privileged (Enable) mode, displays the properties of the
specified MPLS-enabled IP interface. If no interface is specified information about all MPLS-
enabled interfaces will be displayed.
Command Syntax
device-name
#
show mpls interface
[
swN
]
Argument Description
swN
(Optional) Specifies the MPLS-enabled IP Interface.
Example
device-name
#
show mpls interface
+---+------+-----------+-----------+-----------+-----------+--------+---------+
|Idx| Name |Lbl-In min |Lbl-In max |Lbl-Out min|Lbl-Out max|Lbl type| Sig Prot|
+---+------+-----------+-----------+-----------+-----------+--------+---------+
|0 | mpls | 32 | 131071 | 32 | 131071 | Global| all |
|3 | sw0 | 0 | 0 | 0 | 0 | Global| all |
+---+------+-----------+-----------+-----------+-----------+--------+---------+