Foundry NetIron M2404C and M2404F Metro Access Switches
Configuring MPLS and H-VPLS (Rev. 03)
Multiprotocol Label Switching
© 2008 Foundry Networks, Inc
Page 45 of 113
device-name
(config-vpls
ID
)#
no
description
Argument Description
DESCRIPTION
Text description of the VPLS composed of a character string.
Setting the MTU value
The
path-mtu
command, in VPLS Configuration mode, sets the MTU value that will be used
when negotiating a pseudiwire.
The
no
form of this command sets the MTU to its default value of 1500.
Command Syntax
device-name
(config-vpls
ID
)#
path-mtu <512-9216>
device-name
(config-vpls
ID
)#
no path-mtu
Argument Description
512-9216
The MTU value.
Configuring VPLS in SAP Mode
Table 12
lists the VPLS in SAP mode configuration command.
Table 12: VPLS in SAP Mode Configuration Command
Command
Description
ingress-scheduler-policy
Applies ingress scheduler policy to the SAP.
egress-scheduler-policy
Applies egress scheduler policy to the SAP.
hqos-ingress-policy
Applies ingress service QoS policy to the current SAP.
hqos-egress-policy
Applies egress Service QoS policy to the current SAP.
customer-site
Adds the current SAP to the previously created customer
site.
Adding Ingress Service Policy to a Specific SAP
The
ingress-scheduler-policy
command, in SAP Options Configuration mode, applies ingress
scheduler policy to the SAP. To remove the Scheduler Policy from the SAP, use the
no
form of
this command.
By default, no ingress policy is defined on the SAP.
Command Syntax
device-name
(config-vpls-sap
UU/SS/PP:VLAN-ID
)
#ingress-scheduler-policy
SCHEDULER POLICY NAME
device-name
(config-vpls-sap
UU/SS/PP:VLAN-ID
)
#no ingress-scheduler-policy