Foundry NetIron M2404C and M2404F Metro Access Switches
Configuring Advanced Routing Information (Rev. 03)
Open Shortest Path First (OSPF)
© 2008 Foundry Networks, Inc
Page 8 of 68
OSPF Default Configuration
Table 2
shows the OSPF default configuration.
Table 2: OSPF Default Configuration
Parameter
Default Value
Open Shortest Path First (OSPF)
Disabled
Reference bandwidth for cost calculation
According to the bandwidth of the IP interface.
RFC 1583 compliance
Not compatible.
Default metric value
10
External link type
Type 2
Administrative Distances
See
Table 3
Router priority value of the non-
broadcast neighbor
0
Dead Neighbor Polling interval
60 seconds
ABR behavior
RFC 2328,
OSPF Version 2
Router ID
The lowest IP address of the networks assigned to the
area
Overflow Interval
0
Number of LSAs allowed in the router
link-state database
10000
Refresh Timer
10 seconds
SPF Delay Time
5 seconds
SPF Holdtime
10 seconds
NSSA Translator Stability interval
40 seconds
Address range within an area
Advertised
Area shortcutting mode
Default (use area shortcutting only if there is no
connection to the backbone area).
IP interface Cost Value
According to the bandwidth of the IP interface.
IP interface Dead Interval
40 seconds
IP interface Hello Interval
10 seconds
IP interface network type
Broadcast
IP interface Router Priority
1
IP interface Retransmission Interval
5 seconds
IP interface Transmit Delay
1 second
Debug Open Shortest Path First (OSPF)
Disabled