Foundry NetIron M2404C and M2404F Metro Access Switches
Configuring MPLS and H-VPLS (Rev. 03)
Multiprotocol Label Switching
© 2008 Foundry Networks, Inc
Page 31 of 113
Command Syntax
device-name
(config-lsp-
NAME
)
#
ingress-lsr-id A.B.C.D
Argument Description
A.B.C.D
The ingress LSR ID value.
Setting LSP Egress LSR ID
The
egress-lsr-id
command, in LSP Configuration mode, defines an egress LSR ID for a specific
LSP. To change the
egress-lsr-id
execute the command again using a different parameter.
By default no ingress ID value is defined.
Command Syntax
device-name
(config-lsp-
NAME
)
#
egress-lsr-id A.B.C.D
Argument Description
A.B.C.D
The egress LSR ID value.
Setting LSP Setup Priority
The
setup-priority
command, in LSP Configuration mode, specifies setup priority for a specific
LSP. The
no
form of this command sets this parameter to its default value of 0.
By default, the setup priority is 0.
Command Syntax
device-name
(config-lsp-
NAME
)
#
setup-priority <0-7>
device-name
(config-lsp-
NAME
)
#
no setup-priority
Argument Description
0-7
Specifies the Priority value.
Setting LSP Holding Priority
The
holding-priority
command, in LSP Configuration mode, is sets holding priority for a specific
LSP. The
no
form of this command is used to set the signaling protocol to none (static LSP).
The default value of the holding priority is 0.
Command Syntax
device-name
(config-lsp-
NAME
)
#
holding-priority <0-7>
device-name
(config-lsp-
NAME
)
#
no
holding-priority
Argument Description
0-7
Specifies the priority value.