Foundry NetIron M2404C and M2404F Metro Access Switches Configuring VLANs (Rev.03)
GARP VLAN Registration Protocol (GVRP)
© 2008 Foundry Networks, Inc.
Page 67 of 73
Argument Description
join
The GARP Join time is in the range <100-6666>, in milliseconds. Option
Join
must be less than option
Leave/3
.
leave
The GARP Leave time is in the range <300-20000>, in milliseconds. Option
Leave
must be greater than option
Join*3
and less than option
LeaveAll
.
leaveall
The GARP LeaveAll time in the range <300-20000>, in milliseconds. Option
Leaveall
must be greater than option
Leave
.
timer-value
The value for the selected GARP timer, in milliseconds, specified for each
GARP timer.
NOTE
Set the same GARP timer values on all Layer 2-connected devices. If the GARP
timers are set differently on Layer 2-connected devices, the GARP applications (for
example, GMRP and GVRP) do not operate successfully.
GVRP Display Commands
Table 16
lists the GVRP display commands.
Table 16: GVRP Display Commands
Command
Description
gvrp
Displays the GVRP status.
show gvrp
Displays the GVRP status mode.
show garp timer
Displays the GARP timer values.
Displaying the GVRP Status
The
gvrp
command, in Protocol Configuration mode, and the equivalent
show gvrp
command in
Privileged (Enable) mode, display the current GVRP status of the device,
enabled
or
disabled
.
Command Syntax
device-name
(cfg protocol)#
gvrp
device-name
#
show gvrp
Example 1
device-name
(cfg protocol)#
gvrp
GVRP enabled
Example 2
device-name
#
show gvrp
GVRP enabled