Foundry NetIron M2404C and M2404F Metro Access Switches
Configuring MPLS and H-VPLS (Rev. 03)
Multiprotocol Label Switching
© 2008 Foundry Networks, Inc
Page 19 of 113
Command Syntax
device-name
(config)#
no
router ldpmpls tunnel-label <16-1048575> <16-
1048575>
device-name
(config)#
no mpls tunnel-label
Argument Description
16-1048575
Specifies the value of the transport label value for the first uplink port.
16-1048575
Specifies the value of the transport label value for the second uplink port.
MPLS Configuration in LDP Mode
Configuration Flow
The following flow chart shows the process of configuring the MPLS in LDP Mode.
Figure 9: MPLS Configuration Flow in LDP Mode
Yes
No
Define targeted peer
and
hello hold time
Define transport address
End
Is the device a Label
Switching Router
(LSR)?
Start
Enable LDP
Set
MPLS egress
and
MPLS ingress
label ranges
Enable LSR functionality
Set LSR ID