Foundry NetIron M2404C and M2404F Metro Access Switches
Configuring HQoS (Rev.03)
Configuration
© 2008 Foundry Networks, Inc.
Page 53 of 98
Argument Description
hqos-egress-policy-id
Specifies the egress policy ID value, created with the
hqos-egress-policy
<
hqos-egress-policy-id
> command, in
HQoS Configuration mode.
NOTE
Scheduling for traffic transmitted from the SAP is done in two stages.
1) After configuring service egress scheduling, traffic is queued on the access port
egress queue.
2) In the default configuration, strict priority scheduling is done on the physical
access port according to the VPT value in the packet.
Applying Service Ingress Policy to a SAP
The
hqos-ingress-policy
command, in VPLS Service Configuration mode, applies a service
ingress HQoS policy to the SAP. The ingress scheduler policy must be applied to the SAP before
service ingress policy can be applied. (Refer to the
Configuring MPLS and H-VPLS
chapter for
applying the ingress scheduler policy.)
The
no
form of this command removes the service ingress HQoS Policy from the VPLS.
Command Syntax
device-name
(config-vpls-sap
sap id
)#
hqos-ingress-policy
<hqos-ingress-
policy-id
>
device-name
(config-vpls-sap
sap id
)#
no hqos-ingress-policy
Argument Description
hqos-ingress-policy-id
Specifies the ingress policy ID value created with the
hqos-ingress-policy
<
hqos-ingress-policy-id
> command, in
HQoS Configuration mode.
Network Policy Commands
Table 16
lists the network policy configuration commands.
Table 16: Network Policy Configuration Commands
Command
Description
network-policy
Defines a Network Policy.
description
Associate a description with a network policy.
egress
Changes the CLI context to Network Egress configuration mode
so that the egress network policy can be configured.
ingress
Changes the CLI context to Network Ingress configuration mode
so that the ingress network policy can be configured.
fc
Specify the forwarding class on the network egress.