Foundry NetIron M2404C and M2404F Metro Access Switches
Configuring SAA via SNMP (Rev. 01)
Usage Guidelines
© 2008 Foundry Networks, Inc
Page 27 of 40
Execute
:
***** SNMP SET-RESPONSE START *****
1: create new row in
saaCtlTable
by setting rowStatus of the entry with
index
default.T1
to createAndWait(5)
***** SNMP SET-RESPONSE END *******
***** SNMP SET-RESPONSE START *****
2: set
saaCtlTable
.
saaThresholdProfileIdx.default.T1
with value 1
***** SNMP SET-RESPONSE END *******
***** SNMP SET-RESPONSE START *****
3: set
saaCtlTable.saaCtlRowStatus.default.T1
with value active(1)
***** SNMP SET-RESPONSE END *******
This equals the command:
device-name
(config-saa-test)#
profile <1-2147483647>
Argument Description
1-2147483647
Specifies the ID of the existing profile that is attached to the current SAA
test.
Example
device-name
(config-saa-test)#
profile 1
Disable the Current SAA Test
In the
pingCtlTable
(1.3.6.1.2.1.80.1.2), DISMAN-PING-MIB, is executed the following action:
NOTE
The
shutdown
command disables the current SAA test.
Execute
:
***** SNMP SET-RESPONSE START *****
1: set
pingCtlTable.pingCtlAdminStatus.default.T1
with value disabled(2)
***** SNMP SET-RESPONSE END *******
This equals the command:
device-name
(config-saa-test)#
shutdown
Remove the Current SAA Test
In the
pingCtlTable
(1.3.6.1.2.1.80.1.2), DISMAN-PING-MIB, is executed the following action: