![background image](http://html1.mh-extra.com/html/foundry-networks/netiron-m2404c/netiron-m2404c_user-manual_23242731310.webp)
Foundry NetIron M2404C and M2404F Metro Access Switches
Configuring MPLS and H-VPLS (Rev. 03)
Resource Reservation Protocol Traffic Engineering (RSVP-TE)© 2008 Foundry Networks, Inc
Page 81 of 113
Parameter
Default Value
Number of times for retransmission
2
RR interval (in Router Configuration mode) 2000 milliseconds
RR limit (in Router Configuration mode)
2
Refresh interval
30000 milliseconds
Number of unresponded refresh attempts
3
MTU
1500 octects
LSP retry decay rate
0
LSP retry interval
3000 milliseconds
Number of refresh timeout periods (in IP
Interface Configuration mode)
0 (globally defined value)
Hello decay parameter
0
Hello interval parameter
10000 milliseconds
Hello persist parameter
1
Hello tolerance parameter
5
Hello TTL parameter
255
Refresh interval
0 (globally defined value)
Number of unresponded refresh attempts
0
RR decay (in Router and IP Interface
Configuration mode)
100%
RR interval (in IP Interface Configuration
mode)
1000 milliseconds
RR limit (in IP Interface Configuration
mode)
2
Configuring RSVP-TE in Global Configuration Mode
Table 23
lists the RSVP-TE Global Configuration command.
Table 23: RSVP-TE Global Configuration Command
Command
Description
router rsvp
Enables the RSVP protocol and enters the RSVP node.
Enabling the RSVP-TE Protocol
The
router rsvp
command, in Global Configuration mode, enables the RSVP protocol and enters
the RSVP node. If the RSVP protocol is already enabled, the command will only change the mode
to RSVP mode.
The
no
form of this command disables the RSVP protocol.