Foundry NetIron M2404C and M2404F Metro Access Switches
Configuring MPLS and H-VPLS (Rev. 03)
Multiprotocol Label Switching
© 2008 Foundry Networks, Inc
Page 42 of 113
AGID
Represents the outgoing interface (aggregated port) for the selected
Pseudowire. To understand Link Aggregation Groups, please refer to
chapter “
Configuring Interfaces
”.
ldp-peer
Sets SDP type to LDP Peer SDP.
A.B.C.D
Specifies the LDP Peer IP address.
group-id <group-
id>
(Optional). Specifies the Group Identifier value in the range <0-
4294967295>. To understand the
group
option, please refer to RFC
4447 (page 9).
lsp WORD
(Optional).Specifies which one of the RSVP-TE LSPs already
configured will be used as a transport LSP.
Example 1 shows automatic selection of an LSP when creating a Spoke SDP. It is also possible to
select an LSP manually. This is done using the
spoke-sdp
command with the
lsp
WORD
option
(see Example 2).
Example 1
device-name
(config)#
interface lo1
device-name
(config-if lo1)#
ip address 1.1.1.1/32
device-name
(config-if lo1)#
exit
device-name
(config)#
ip route 2.2.2.2/32 55.0.0.2
device-name
(config)#
mpls ingress 2.2.2.2/32
device-name
(config)#
mpls egress 1.1.1.1/32
device-name
(config)#
mpls lsr-id 1.1.1.1
device-name
(config)#
router ldp
device-name
(config-router)#
transport-address 1.1.1.1
device-name
(config-router)#
targeted-peer 2.2.2.2
device-name
(config-router)#
exit
device-name
(config)#
vpls mode unqualified
device-name
(config)#
vpls 12
device-name
(config-vpls 12)#
def-vc-id 10
device-name
(config-vpls 12)#
sap 1/1/1
device-name
(config-vpls 12)#
spoke-sdp ldp-peer 2.2.2.2
Example 2
Creating a tunnel:
------------------
device-name
(config)#
router rsvp
device-name
(config-router)#
exit
device-name
(config)#
mpls lsp la
device-name
(config-lsp-la)#
path p
device-name
(config-tunnel-path)#
hop 10.0.0.2 strict
device-name
(config-tunnel-path)#
exit
device-name
(config-lsp-la)#
ingress-lsr-id 3.3.3.3
device-name
(config-lsp-la)#
egress-lsr-id 2.2.2.2
device-name
(config)#
vpls mode unqualified
device-name
(config)#
vpls 11
device-name
(config-vpls 11)#
def-vc-id 10