Foundry NetIron M2404C and M2404F Metro Access Switches
Network Administration Tools (Rev. 03)
MEF OAM
© 2008 Foundry Networks, Inc.
Page 35 of 155
Displaying the MEF OAM Configuration
The
show oam
command, in Privileged (Enable) mode, displays the MEF OAM configuration.
Table 6
describes the parameters displayed by the
show oam
command.
Command Syntax
device-name
#
show
oam
Example1
The following example displays the MEF OAM detailed configuration when the MEF OAM is
loaded:
device-name
#
show oam
! MEF OAM Configuration
oam recalculation-cycle 15
oam ethertype 0x889C
oam multicast-address 01:12:F2:10:00:00
oam bridge 255
oam results-bucket-size 10
oam hello-interval 15
oam hello-rate 1
oam frame-size 64
oam priority 6
oam connectivity-timeout 90
oam jitter 600
oam pdu-limit 40
! all the device ports are members of the MEF OAM domain
oam create-process 00:12:F2:11:02:22 TEST2 repeat minutes 0 seconds 2
oam vlan 2
oam timeout 4000
oam priority 6
oam frame-size 64
oam results-bucket-size 30
oam frame-loss-error 10 0
oam frame-loss-warning 8 0
oam latency-error 2000 period 90
oam latency-warning 1600 period 180
oam jitter-error 700 period 90
oam jitter-warning 600 period 180
exit
oam create-process 00:12:F2:11:02:22 TEST10 repeat minutes 0 seconds 2
oam vlan 10
oam timeout 4000
oam priority 6
oam frame-size 64
oam results-bucket-size 30
oam frame-loss-error 10 0
oam frame-loss-warning 8 0
oam latency-error 2000 period 90
oam latency-warning 1600 period 180
oam jitter-error 700 period 90
oam jitter-warning 600 period 180
exit
oam create-process 00:12:F2:11:02:22 TEST1 repeat minutes 0 seconds 2
oam vlan 1
oam timeout 4000