Foundry NetIron M2404C and M2404F Metro Access Switches
Network Administration Tools (Rev. 03)
802.1ag Connectivity Fault Management (CFM)
© 2008 Foundry Networks, Inc.
Page 113 of 155
6. Specify the identification data to be sent to the remote MEPs and the MIP creation policy on
the specified MA:
Device2
(config-cfm
-
d7-ma7)#
senderid-content hostname
Device2
(config-cfm
-
d7-ma7
)
#
mip-policy explicit
7. Add port 1/1/2 as MEP to a specified maintenance association.
Device2
(config-cfm-d7-ma7)#
mep 2 port 1/1/2 out
Device2
(config-cfm-d7-ma7)#
end
Display CFM Configuration and CFM Connectivity Statistics
Device1
#
show cfm
Domain: d7
Level: 7
Hello interval (ms): 1000
Maintenance association: ma7
VLAN ID: 10
Priority: 6
Mip Policy: default
Local MEPs
=========================================================
| MEP | Port | Adm | Oper | Sent | Last |
| | | State | State | CCM | CCM |
|-----+----------+-------+-------+--------+-------------|
| 1| 1/1/1 | Up | Up | 222| 16:31:53.120|
=========================================================
Device1
#
show cfm connectivity
Domain: d7
Level: 7
Hello interval (ms): 1000
Maintenance association: ma7
VLAN ID: 10
Priority: 6
Jitter thresholds (error/warning): 350/300 ms
Bucket size: 10
Remote MEPs
========================================================================
| MEP| MAC-address | Adm | Oper |Received| 1 way | Last |
| | | State | State | CCM | Jitter | CCM |
|----+-----------------+-------+-------+--------+--------+-------------|
| 2|00:12:F2:11:02:22| Up | Up | 189| 0.0 | 16:32:05.000|
========================================================================
Send a loopback message to a specified MEP in a specified domain
Device1
#
cfm loopback domain d7 ma ma7 mep 2 delay 0 number 10
Sending 10 loopback message(s) to mep-id 2 (00:12:F2:11:02:22)
..........
Done.