Foundry NetIron M2404C and M2404F Metro Access Switches
Configuring HQoS (Rev.03)
Configuration
© 2008 Foundry Networks, Inc.
Page 52 of 98
Argument Description
wred-profile-id
Specifies the WRED profile ID in the range <1-64>. Before
associating the policy to the queue, the policy must be created using
the
wred-profile
<wred-profile-id> command, in HQoS Configuration
mode.
Applying WFQ Profile to Service Egress and Ingress Queues
The
service-wfq-profile
command, in Service Ingress/Egress Queue Configuration mode, defines
WFQ scheduling parameters for this service queue.
The
no
form of this command resets the weight to its default value.
Command Syntax
device-name
(config hqos-in-que
queue-id
)#
service-wfq-profile <service-
wfq-profile-id
>
device-name
(config hqos-in-que
queue-id
)#
no service-wfq-profile
device-name
(config hqos-eg-que
queue-id
)#
service-wfq-profile <service-
wfq-profile-id
>
device-name
(config hqos-eg-que
queue-id
)#
no service-wfq-profile
Argument Description
service-wfq-profile-id
Specifies the policy ID indicating the WFQ queue weight
parameters in the range <1-61>.
Applying Service Egress Policy to a SAP
The
hqos-egress-policy
command, in VPLS Service Configuration mode, applies a service egress
QoS policy to the SAP. The egress scheduler policy must be applied to the SAP before the service
egress policy can be applied.
NOTE
Even when there is one single SAP, applying egress scheduler policy to this SAP
requires that the
secure-saps
command to be first executed.
NOTE
Although egress scheduler policy and service egress policy are applied using the
sap
UU/SS/PP
option command, the egress policy is applied on a per VPLS basis
and not on a per SAP basis.
The
no
form of this command removes the Service Egress HQoS Policy from the VPLS.
Command Syntax
device-name
(config-vpls-sap
sap id
)#
hqos-egress-policy
<hqos-egress-
policy-id
>
device-name
(config-vpls-sap
sap id
)#
no hqos-egress-policy