Installation accessories
安装附件介绍
The installation tools are not provided with the switch. Prepare them yourself.
交换机不随机提供安装工具，请用户根据实际安装需求自己准备安装工具。
Phillips screwdriver
十字螺丝刀
ESD wrist strap
防静电腕带
Marker
记号笔
Tool list
工具参考
Attaching the accessories to the switch
安装附件到交换机
Grounding cable and
grounding screw
接地线和接地螺钉
M6 screw and cage nut
(user supplied)
M6
螺钉和浮动螺母
（请用户自备）
Power module filler panel
电源假面板
M4 screw
M4
螺钉
Removable cable tie
可拆卸式扎带
Mounting bracket and
cable management bracket
带有走线架的挂耳
Chassis rail and
slide rail
滑道和导轨
The chassis provides multiple installation positions for chassis rails on its two sides. Select an
installation position for chassis rails based on the rack deptH. When you rack-mount the switch,
make sure the slide rails reach out of the chassis rails to maintain the chassis stability.
设备侧面板提供了多个滑道导轨安装位，用户可根据机柜的深度，调整滑道导轨的安装位置；为
保证设备安装后的稳定性，当滑道与滑道导轨安装完成后，请确保滑道的头部露出滑道导轨。
Identify the left and right mounting brackets before installing them. The left mounting bracket is
marked L and the right mounting bracket is marked R.
挂耳区分左右，可以通过挂耳上的丝印识别，左侧挂耳具有“
L
”标识，右侧挂耳具有“
R
”标识。
Before installation, wear an ESD wrist strap, and make sure the wrist strap makes good skin
contact and is reliably grounded.
在以下安装过程中，请您佩戴防静电腕带，并确保防静电腕带已经正确接地并与皮肤良好接触。
Install the mounting brackets near the port side
挂耳安装在靠近端口侧
!
This installation option is applicable to a rack with a distance of 501 mm (19.72 in) to 778 mm
(30.62 in) between the front and rear rack posts.
此安装方式适用于前后方孔条间距在
501mm
～
778mm
范围内的机柜。
Install the chassis rail at a or b.
挂耳安装在靠近端口侧时，滑道导轨可安装在
a
或
b
任意一处。
2
1
Install the mounting brackets near the power module side
挂耳安装在靠近电源侧
This installation option is applicable to a rack with a distance of 506 mm (19.92 in) to 778 mm
(30.62 in) between the front and rear rack posts.
此安装方式适用于前后方孔条间距在
506mm
～
778mm
范围内的机柜。
Install the chassis rail at c, d, or e.
挂耳安装在靠近电源侧时，滑道导轨可安装在
c
、
d
或
e
任意一处。
a
b
H3C S9820-64H Switch Installation Quick Start-5W101
H3C S9820-64H
交换机 快速安装指南
-5W101
c
d
e
