Foundry NetIron M2404C and M2404F Metro Access Switches
Configuring SNMP (Rev. 03)
Simple Network Management Protocol
© 2008 Foundry Networks, Inc.
Page 24 of 48
Argument Value
Description
cliconfigurationChanged
This trap informs the user if a change of
configuration has been performed through the
CLI (telnet, SSH session) and logged in
NVRAM. This notification does not contain any
variable bindings because the software does not
have SNMP support for configuration history.
The
configurationChanged
trap is generated
whenever the user exits the Global
Configuration mode.
Note
:
The
configurationChanged
notification is
generated when:
- Configuration-history recording is enabled
(use the
record configuration-history nvram
command in Global Configuration mode;
- A configuration-history session is added to the
configuration history.
snmpSetExecute
This trap informs the user when a successful
SNMP SET request has been executed. The
notification provides information about the
security parameters of the packet containing the
SET request. The
snmpSetExecuted
notification
will be sent directly by the SNMP agent.
Note
:
The generation of the
snmpSetExecute
notification is also controlled by the
snmp-
server set-execute-trap
command.
sysIntfModuleChange
This trap enables notification for interface
module state change.
batmCESDsx1Alarm
This trap is sent when the value of a TDM port
error condition statistic has exceeded the
configured threshold, or the value has dropped
back below the threshold.
batmCESAvailable
This trap is sent when module is in READY
state.
batmCESUnAvailableDueExtract
This trap is sent
when module is in Extracted
state.
batmCESUnAvailableDueReload
This trap is sent
when module is in InInit
(Restarted) state.
batmCustCreated
This trap is sent when a new row is created in
the custInfoTable.
batmCustDeleted
This trap is sent when an existing row is deleted
from the custInfoTable.
batmPwVcTDMAlarm
This trap is sent when the value of a TDM port
error condition statistic has exceeded the
configured threshold, or the value has dropped
back below the threshold.