Foundry NetIron M2404C and M2404F Metro Access Switches
Configuring MPLS and H-VPLS (Rev. 03)
Multiprotocol Label Switching
© 2008 Foundry Networks, Inc
Page 55 of 113
| Configured Hold Time : 5 |
| Peer Hold Time : 5 |
| Hold Time In Use : 5 |
| Keep Alive Hold Time Remaining : 4 |
| Session State : Operational |
+---------------------------------------------------+
| Total Sessions: 1 |
+---------------------------------------------------+
Displaying LDP & LSP Running Configuration
Table 19
lists the LDP & LSP Running Configuration commands.
Table 19: LDP & LSP Runnig Configuration Commands
Command
Description
show running-config ldp
Enables displaying the LDP tunnel configuration.
show running-config lsp
Enables displaying the LSP running configuration.
Displaying the Current LDP Tunnel Configuration
The
show runnig-config ldp
command, in Privileged (Enable) mode, enables displaying the tunnel
configuration.
Command Syntax
device-name
#
show running-config ldp
Example
device-name
#
show running-config ldp
Building the configuration ...
! LDP Configuration:
!
!
………
!
!
mpls lsr-id 30.30.30.30
!
mpls lsp-ping-use-draft3
!
router ldp
transport-address 30.30.30.30
targeted-peer 1.1.1.1
!
! VPLS Configuration:
!
!
!
vpls mode disable
!