Foundry NetIron M2404C and M2404F Metro Access Switches
Network Administration Tools (Rev. 03)
Service Assurance Application (SAA)
© 2008 Foundry Networks, Inc.
Page 149 of 155
4. Enable MPLS on interface lo1:
Device3
(config)#
interface lo1
Device3
(config-if lo1)#
mpls
Device3
(config-if lo1)#
exit
5. Enable LDP protocol:
Device3
(config)#
mpls lsr-id 3.3.3.3
Device3
(config)#
router ldp
Device3
(config-router)#
transport-address 3.3.3.3
Device3
(config-router)#
targeted-peer 1.1.1.1
Device3
(config-router-peer 1.1.1.1)#
exit
Device3
(config-router)#
exit
6. Set VPLS mode on
Device3
and define VPLS instance “10”:
Device3
(config)#
vpls mode unqualified
Device3
(config)#
vpls 10
Device3
(config-vpls 10)#
def-vc-id 10
Device3
(config-vpls 10)#
sap 1/1/7
Device3
(config-vpls 10)#
no shutdown
Device3
(config-vpls 10)#
sdp 3.3.3.3
Device3
(config-vpls-sdp 3.3.3.3)#
no shutdown
Device3
(config-vpls-sdp 3.3.3.3)#
exit
Device3
(config-vpls 10)#
exit
Create an SAA Threshold Profile and Configure an SAA Test on Device1:
1. Create an SAA threshold profile and set the jitter-error threshold value, latency-error threshold
value and frame-loss-error threshold value:
Device1
(config)#
saa profile 1 Profile
Device1
(config-saa-profile)#
jitter-error 20
Device1
(config-saa-profile)#
latency-error 200
Device1
(config-saa-profile)#
frame-loss-error 5
Device1
(config-saa-profile)#
exit
2. Create a new SAA test:
Device1
(config)#
saa test T1
3. Configure the MEF OAM private attributes for the test by setting the VC ID and MAC address:
Device1
(config-saa-test)#
type oam service 10 XX:XX:XX:XX:XX:XX
4. Attach the threshold profile to the current test:
Device1
(config-saa-test)#
profile 1
5. Set the probes count, probe statistics, repeat frequency, probe data length and probe timeout for
the current test:
Device1
(config-saa-test)#
probe-count 5
Device1
(config-saa-test)#
probe-statistics 10
Device1
(config-saa-test)#
frequency 50
Device1
(config-saa-test)#
data-size 74
Device1
(config-saa-test)#
timeout 5